View Ops Calibrate Cal Method Capture 1 Capture 2 Process Clear All Camera Select Enable Audio Enable Compass File Help Close

X

Open Local Save Local Open FS Save FS Save Image 1 FS Save Image 2 FS Save Image 3D FS Close

Open File Select File: Cancel

Camera Position Calibration Capture 1 Capture 2 Processing 3D Close

Edit Capture 1 Data Edit Capture 2 Data Edit Item Clear 3D Objects Define Ceiling Height Report Buffer Close

Start Stop Report Config Close

Start Stop Report Config Close

Close

About License Known Issues Quick Hints More Help Close

eightolives Pix Development Version 0.1 copyright © 2022 William Kaupinis, All rights reserved. eightolives.com Close

Welcome to
eightolives Pix

Pix uses your camera to measure distances and develop maps.

Cookies help deliver our services and store your data. By using Pix, you agree to our use of cookies. Learn more about Cookies.
Got It

eightolives Pix

To measure distances, please allow Pix to access your camera.

To identify absolute location and longer distances, please allow Pix to access your geolocation data if requested.

Got it

You need to calibrate first!

1.Tilt the camera straight down until your toes are in the yellow crosshairs and then click Capture.

2.Then tilt the camera until your toes are in the green or red crosshairs and the click Capture.

Got it

Open File Open file: Open Cancel Delete

Distance to Point on Floor 1. From your anchor point, with the camera 10 inches in front of you at eye level, rotate your body to face the target using the vertical crosshair. Tip the camera to pinpoint the target using the horizontal crosshair. Capture1. 2. Calculate Cancel

Distance 1. From your anchor point, capture pictures of the target point from 2 angles in Capture1 and Capture2. 2. Add a marker to identify the target in Capture1. 3. Add a marker to identify the same target in Capture2. 4. Calculate Cancel

Select a Camera - Select Cancel

REF - Lens Offset
Horiz REF(you) to lens	0 tripod 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20  in
Vert REF (floor) to lens (your eyelevel)	0 1 2 3 4 5 6 7 8 9 10  ft
	0 1 2 3 4 5 6 7 8 9 10 11  in
SaveClose

Calibrate Lens Height:

Pix needs to know where the lens is. You can either:

1. Enter the values directly (your height - 3 inches) or
2. Measure a known distance on the floor (tile width) or
3. Measure a known height (floor to doorknob)

Camera

Capture
Run Pause Clear

Floor Corner Ceiling Corner Point on Wall New REF

Vertical Point Add Wall

Edit Data

Select Item:  

Edit Cancel Delete Item

Edit REF

ID
REFX
REFY
REFZ

Save Edit Cancel

Edit Wall

ID
WALLX
WALLY
WALLZ
WIDTH
HEIGHT
THICKNESS
ANGLE X
ANGLE Y
ANGLE Z
COLOR

Save Edit Cancel

Edit Marker

ID
SCREEN X
SCREEN Y
TITLE
LABEL
ICON

Save Edit Cancel

Edit Data

ID
DESC
REF ID
Horiz REF(you) to camera	inches
Vert REF (floor) to camera (your eyelevel)	feet
	inches
FWD TILT
SIDE to SIDE OFFSET
COMPASS
Est. REF to TARGET	feet

Save Edit Cancel

Camera Position

FWD TILT
SIDE to SIDE OFFSET
COMPASS
LAT
LONG
ALT (m)
ACCURACY (m)
ALPHA
BETA
GAMMA

Calibration

Estimate Camera to Body (in)
Estimate Camera Height (ft)
Ground Span (ft)
Camera View Angle
Camera Portait Normal
Camera Flat Face Up
Camera Portait North

Capture 1

Add MarkerClearAdd to Buffer

Capture 2

Add MarkerClearAdd to Buffer

Processing

3D

x - green, y - blue, z - yellow, a - x:y, b - z:y

ESC Look 0   Ref Animate

-180		180	Compass
-90		90	Tilt
-1		20	Height

Manual Track

Report

Clear   Save   Save Report Local